Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Miramar
A new garage door installation in Miramar typically runs $700-$2,200, and the door you choose must carry a Florida Product Approval number that matches your home’s wind-load zone. That second part is where a lot of homeowners get tripped up, because it’s not optional. It’s Broward County code, and your HOA’s architectural review board will check it too. Our Garage Door Installation team handles the full job from measuring to cleanup, and every quote is a flat written price before any work starts, per Clause 1 of The Haven Standard. Call (754) 465-7645 and you’ll reach a live person who can schedule a free measure.
Why Servo Garage Doors Hollywood Is Miramar’s Preferred Garage Door Installation Company
Miramar’s western half is almost entirely master-planned communities: Silver Lakes, Monarch Lakes, Vistamar, Sunset Lakes. Each one has an HOA with its own architectural review committee, and those committees have opinions about garage door panel profiles, colors, and even the embossment pattern on a steel door. We work inside those rules every week. The job is not just bolting a door to the opening. It’s knowing which Clopay or Amarr panel profile passes review in Silver Lakes versus what flies in a 1980s east-side neighborhood with no HOA at all.
Marcus Deller, who leads our team, built Servo’s process around documentation for exactly this reason. When an HOA asks whether a replacement panel matches the original, we don’t send them a verbal assurance. We send photos. The failed component, the new panel spec, the Florida Product Approval number, the paint code. It’s all in the photo record you receive when the job closes. That’s the founding rule Service was built on in 2015, and it’s now Clause 4 of The Haven Standard.
Our Garage Door Installation Services in Miramar
New Door Installation
A full new door installation in Miramar means more than hanging panels. We remove the old door, inspect the track, end bearing plates, and torsion assembly, then install the new door with fresh weather seal and a balance test. For homes in the HVHZ zones on Miramar’s west side, we confirm the door’s Florida Product Approval before we order it, not after it arrives. The price range for new door installation here runs $700-$2,200, and you’ll see the exact number in your written quote before anything is ordered.
Single Car Door
Most Miramar homes built in the 1990s and 2000s use a 9×7 or 8×7 single door, often paired with a second single door rather than a double. The dominant housing stock is concrete block stucco, and those openings are standard enough that we can usually source a replacement quickly. If your single door has a side-mount opener or a low-headroom track setup, tell us on the call. It changes how we measure and what hardware we bring.
Double Car Door
A 16×7 double door is the most common size we install in Miramar’s two- and three-car garages. These doors weigh more, cycle more often, and wear torsion springs faster than a single. When we install a new double door, we check the spring’s cycle rating against the new door’s weight. If the spring is original to a 2001-era home, it’s usually past its useful life. We’ll quote the replacement separately and in writing, no pressure. Steel double doors from Amarr and Wayne Dalton are the most common choices we document in Miramar garages, largely because HOAs prefer their clean panel profiles.
Custom Garage Door
Custom doors in Miramar almost always mean one of two things: a specific wood-look finish that matches the home’s front entrance, or a door sized to a non-standard opening, usually on a 1980s or 1990s custom home east of University Drive. Wood doors are available, but we’re straight with customers: real wood in South Florida humidity needs more maintenance than a steel door with a wood-grain finish. A custom door also has a longer lead time than a stock door. We quote it flat, in writing, before ordering, and the written scope includes the exact finish, panel profile, and Product Approval documentation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Miramar
We work on and install all eight major brands, and we stock common parts locally so a Miramar job doesn’t wait on a shipment from another state. LiftMaster and Chamberlain openers, Clopay and Amarr doors, Wayne Dalton and Raynor hardware. If your HOA’s architectural guidelines name a specific approved brand or panel profile, bring that document to the measure. We’ll match it or tell you honestly if the spec conflicts with wind-code requirements, and we’ll give you the paperwork to sort that out with your board.
Common Garage Door Installation Problems We See in Miramar Homes
- Non-approved doors from online retailers. A homeowner orders a door to save a few hundred dollars, and the HOA flags the panel profile or color as non-conforming. The homeowner ends up paying for a second door. We see this a few times a year in Silver Lakes and Monarch Lakes.
- Unbalanced doors after a rushed install. An unlicensed installer hangs the door on old track without checking alignment or end bearing plates. The door works for a month, then the torsion spring binds. A new installation should always include a balance test and a spring cycle check.
- Missing Florida Product Approval documentation. After a hurricane, the insurance adjuster asks for the wind-load approval number on the replacement door. The homeowner doesn’t have it because the installer never provided it. Claims get denied this way. We hand you the documentation as part of the photo record.
- Original doors hitting end-of-life at the same time across a subdivision. Miramar’s 1990s and 2000s building boom means thousands of homes have garage doors that are now 20 to 30 years old. Springs, panels, and openers are failing in clusters. If your neighbors on the same street are replacing doors, there’s a reason.
Pricing for Garage Door Installation in Miramar, FL
Here’s what to expect in Miramar, in dollars, per our current market data. These are the ranges we quote from. The exact number on your written quote depends on door size, panel material, insulation, and whether the existing track and hardware can be reused. No one gives you a real number over the phone without a measure, so we don’t pretend to. What we do guarantee is that the price you sign off on is the price you pay. Clause 1 of The Haven Standard: written price, written scope, before work starts.
| Service | Price Range in Miramar |
|---|---|
| New Door Installation | $700-$2,200 |
| Panel Replacement | $250-$500 |
| Track Realignment | $120-$240 |
Every estimate is free and includes a written scope. That scope lists the door spec, the Florida Product Approval number when applicable, and the exact total. You’ll know the number before we order anything. Call (754) 465-7645 to schedule the measure.
We Also Serve Cities Near Miramar
Our crews serve Miramar and the surrounding South Broward corridor, including Hollywood, Dania Beach, Hallandale Beach, and Ojus. If you’re in one of those cities and researching options, see our Garage Door Installation in Miramar page for local pricing context, or call us directly for a written quote. The paperwork travels with us.
Serving Miramar, FL - Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Miramar
Yes, in most Miramar communities with an architectural review board, you need written approval before changing the door’s panel profile, color, or material. The fastest path is to pull your HOA’s approved-door specifications before you call us. We’ll match the spec exactly, and our photo record includes the documentation your board will ask for. If your HOA hasn’t given you the spec, we can install to the community’s standard profile and provide the paperwork for a retroactive filing. Call (754) 465-7645 and we’ll walk you through it.
Miramar sits inside Broward County’s High-Velocity Hurricane Zone, so the door must carry a Florida Product Approval that matches your home’s specific wind-speed zone. The exact rating depends on your address, not just your city. We verify the required rating for your home during the measure and confirm the door’s approval number before we order. That number goes in your written quote and your final photo record. Without it, an insurance adjuster can deny a storm-related claim after the fact.
Usually, yes. We were called to a 2002 concrete block stucco home in Silver Lakes after the owner received an HOA violation for a mismatched panel. Our tech confirmed the original 16×7 Clopay steel door needed a new bottom panel with the same embossed texture and paint code, then checked the existing torsion spring’s cycle rating before installing the panel with fresh weather seal. The whole job was documented for the architectural review board. If your panel can’t be matched exactly, we’ll tell you that in writing and quote a full replacement instead. Call (754) 465-7645 for a written quote, estimates are free.
Yes, if you choose the right hardware. The door itself doesn’t make the noise. The rollers, hinges, and opener do. We recommend nylon rollers and a belt-drive opener for anyone in Miramar whose garage faces a courtyard, a neighbor’s bedroom window, or a shared wall. A belt-drive LiftMaster or Chamberlain is dramatically quieter than a chain-drive. We’ll quote the quiet option as a line item so you see exactly what it costs. No surprises, written down before we start.
You hand them the documentation we give you at the end of every job. Every Servo install includes a photo record of what was found and what was done, including the Florida Product Approval number for the door and the written scope with the price and the spec. That’s the paper trail the brand was built on. If your adjuster or HOA asks for more, we’re a phone call away. Estimates are free, so call (754) 465-7645 and start with the measure.
Written by Marcus Deller, Owner at Servo Garage Doors Hollywood, serving Miramar under The Haven Standard since 2015.