Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Repair for Hollywood Homeowners
A garage door that won’t open in Hollywood usually means one of a handful of things: a broken torsion spring, snapped cable, or a logic board that quit. Most repairs in this area run $150-$600, and our trucks carry the common parts, so we can frequently diagnose and fix the problem in a single visit. Servo Garage Doors Hollywood has made more than 18,000 garage doors right since 2015, every one of them with a written price before work started. Marcus Deller and our background-checked technicians answer calls 24/7, and we photograph the failed component before quoting a replacement. Call (754) 465-7645 and you’ll speak to a live person, not a recording.
What Our Garage Door Repair Service Includes
Most garage door failures give a warning first. A grind, a hesitation, a door that sits slightly crooked. Our job as your Garage Door Repair in Hollywood team is to name the part that failed, show you the evidence, and fix it at a price you approved in writing before we touched anything. Here’s what that covers.
Panel Replacement
A dented or cracked panel isn’t just cosmetic. Water gets in, the door’s balance shifts, and the extra weight puts strain on springs and cables that weren’t built for it. We offer Panel Replacement on most Clopay and Amarr doors, matching paint and profile so the repair doesn’t announce itself from the street. If a full section is cheaper than a patch job, we’ll tell you that too, with the numbers side by side.
Spring Repair
Your torsion spring is the coiled steel part above the door that does the heavy lifting. When it snaps, you’ll usually hear it, a sharp crack like a firecracker, and the door won’t budge, even with the opener straining. Springs are wound under enormous tension, which is why this is a job for a trained technician, not a weekend project. We replace Hollywood springs in pairs as standard practice, because when one breaks, the other has the same fatigue and is next.
Cable Repair
The lifting cables run along each side of the door and carry the door’s weight from the spring system to the bottom brackets. A frayed cable shows broken wire strands near the drum; a snapped one leaves the door lopsided or jammed. In Hollywood’s salt air, especially east of US-1, we see cable corrosion on doors that are only five or six years old. We handle Cable Repair, inspect the drums and brackets for scoring, and photograph the old parts before they go in the truck.
Track Realignment
Garage door tracks are the vertical and horizontal rails the rollers ride in. If the door shudders on the way up or the gap between door and track changes as it moves, the track has likely shifted or bent. We use a laser level to check alignment, not just a visual once-over, then re-secure the brackets and re-set the track to manufacturer spec. A misaligned track left alone will chew through rollers and can eventually throw a cable.
Roller Replacement
Rollers are the small wheels that carry the door along the tracks. Nylon rollers are quieter; steel rollers last longer; both wear out. If you hear a rumble or notice the door hesitating at certain points in its travel, the rollers are usually the first suspect. We stock both types for Wayne Dalton, Craftsman, and other common Hollywood installs, and we do Roller Replacement on the full set rather than one at a time, since a mixed set wears unevenly.
Sensor Calibration
The photo eyes near the bottom of the door are the small sensors that stop the door if a child, pet, or car is in the way. If the door reverses for no reason or the opener’s lights flash without moving, a misaligned or dirty sensor is the most common cause. We perform Sensor Calibration, testing with an actual obstruction, then verify the reversal force setting on the opener itself, because a sensor that passes a visual check can still be reading wrong.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Repair
We service all eight major brands in Hollywood, and we’ve repaired enough of each to know their specific failure patterns. Clopay residential doors, common in the newer developments west of 75, typically fail at the hinge line on steel panels exposed to the afternoon sun. Amarr doors, more common in the older sections of Hollywood Lakes and Emerald Hills, tend to need spring and cable work as the original installations enter their second decade. We stock OEM parts for both and can usually have a Clopay or Amarr door balanced and running the same day.
Craftsman openers show up in a lot of Hollywood garages paired with doors from other manufacturers. The opener’s logic board or the trolley carriage is usually where they fail after seven to ten years. Wayne Dalton doors have a distinctive torquemaster spring system that most companies won’t touch, but we work on it regularly. Whatever brand you have, the diagnosis follows the same rule: the failed part gets photographed, the replacement gets quoted in writing, and you decide before we turn a wrench.
BeforeAfterSigns You Need Garage Door Repair Right Now
- The door won’t open or close fully. This is the one nobody ignores. The cause is usually a spring, cable, or sensor problem, and forcing the door to move by hand can make a $200 repair into a $600 one. Call and we’ll walk you through a quick safe check over the phone.
- You hear a loud bang from the garage. That’s a torsion spring breaking under load. The door won’t lift manually either, because the spring does the lifting. Don’t try to raise it. We answer 24/7 and can usually have a technician in Hollywood within an hour.
- The door is crooked or hangs unevenly. A cable has likely snapped or slipped its drum, which means one side is carrying all the weight. That’s dangerous to leave, and the longer it sits, the more likely the track bends or the other cable follows.
- The door reverses before fully closing. The photo eye sensors may be blocked, misaligned, or the opener’s force setting is off. This is a safety feature working, but it usually means a simple calibration is overdue. We can often fix it in under an hour.
- The door is louder than it used to be. Grinding, squealing, or rattling is metal on metal, and it means rollers, hinges, or bearings are running dry or already worn out. A loud door is a door telling you something, and ignoring it usually means a bigger repair later.
Our Garage Door Repair Process - Step by Step
We built our process around a simple idea: you should see what we see before you spend a dollar. It’s called the Haven Standard, and every Hollywood job follows it.
- 1
Initial diagnosis and photo documentation. The technician inspects the door, opener, tracks, springs, and cables. The failed component gets photographed before anything is quoted. Clause 4 of The Haven Standard is why we show you the broken spring or snapped cable as evidence, not as a sales pitch.
- 2
Written scope and flat price. Before any work begins, you receive a written scope of work and a flat price. The number doesn’t change after we start. Clause 1 of The Haven Standard says written price before work starts; ‘call for a quote’ is not how this works.
- 3
Repair with OEM or spec-matched parts. We use manufacturer-grade parts matched to your door. For LiftMaster, Chamberlain, and Genie openers, that means OEM boards, not generic substitutes. For springs and cables, wire diameter and length are matched to the door’s weight, not guessed.
- 4
Testing and verification. The door gets cycled a minimum of five times under our eyes, then balance-tested with the opener disengaged. The photo eyes get tested with an obstruction. The reversal force gets checked. We don’t leave until the door operates smoothly and quietly.
- 5
Documented photo record delivered to you. Before we pull out of the driveway, you get a photo record of what we found and what we did, plus a written description of the work. It’s the same documentation we’d want if we were the homeowner. The 365-Day Done Right Promise backs every job: if it’s not right, we make it right.
How Much Does Garage Door Repair Cost in Hollywood?
A typical garage door repair in Hollywood runs $150-$600, with most jobs landing in the $180-$340 range. Spring repair, the most common call we get, costs $180-$340 depending on whether it’s a standard torsion spring or a Wayne Dalton torquemaster system. Cable repair runs $130-$250; roller replacement runs $110-$220; track realignment runs $120-$240. If the opener itself failed, opener repair can run $120-$320, and a new opener installed runs $250-$550.
What changes the price? Door weight and size matter because springs and cables are matched to weight. The age of the door matters too, since older doors sometimes need bearings or brackets replaced along with the obvious part. Flush panel doors common in Hollywood’s newer communities are usually simpler and less expensive to repair than the carriage-house styles with decorative hardware. We give you the exact price in writing before any work starts, so the estimate you approve is the price you pay. If another company has given you a written estimate, bring it. Our free second opinion offer means we’ll look at it and give you our assessment, no coupon or code required.
Garage Door Repair Near Hollywood - Our Service Area
We work throughout Hollywood, from Hollywood Lakes and Emerald Hills to the 441 corridor and the neighborhoods west of 75. The garage door repair team also covers Garage Door Repair in Dania Beach and Garage Door Repair in Hallandale Beach, along with Aventura, Ojus, Sunny Isles Beach, and North Miami Beach. A technician can usually reach most Hollywood addresses in 45 minutes or less, and we carry the common parts on the truck so we can often fix the problem the same day.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Repair in Hollywood
Garage door repair is the process of diagnosing and fixing a door that won’t open, close, or operate safely, whether that means replacing a broken torsion spring, a snapped cable, a worn roller, or a failed opener logic board. In Hollywood, the most common repairs we handle are spring replacements, cable replacements, and sensor realignment. Every repair starts with a diagnostic inspection and a written price before any work begins.
Most repairs take 60 to 90 minutes once the technician arrives. Spring replacement, cable replacement, roller replacement, and sensor calibration usually fit in a single visit because we carry the common parts on the truck. If the repair requires a part we don’t stock, like a rare panel profile, we’ll order it and schedule the follow-up before we leave.
Most Hollywood garage door repairs run $150-$600. Spring repair runs $180-$340, cable repair $130-$250, roller replacement $110-$220, track realignment $120-$240, and panel replacement $250-$500. The exact price depends on your door’s weight, size, and the specific part that failed, and you’ll get a flat written price before we start. Call (754) 465-7645 and we’ll give you the range over the phone and the exact number on site.
Yes, we service all eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, and Wayne Dalton. We stock OEM parts for these brands and work on their specific systems, including Wayne Dalton’s torquemaster spring. If you have another make or an older door from a brand we haven’t listed, give us a call, the diagnostic process is the same.
Yes. We answer calls 24/7, including holidays, and you’ll speak to a live person, not a recording, who will take your details and dispatch a technician with an on-the-way text. A door stuck open overnight is a security problem, not just an inconvenience, and a door stuck closed means your car is trapped. We treat both as emergencies and can usually reach Hollywood addresses in under an hour.
Every repair we do in Hollywood is backed by the 365-Day Done Right Promise: if the repair isn’t right, we make it right. The specific parts we install carry their own manufacturer warranties, and we put the terms in writing with your scope of work. You’ll have a documented photo record of what we found and what we did, so if anything does come up, we’re both looking at the same evidence.
Clear the area inside the garage near the door tracks and opener, about three feet of space, so the technician can work safely. Park your cars outside if you can, and move anything that blocks access to the door from inside or out. You don’t need to do anything else. The technician will inspect, document findings, and give you a written price before any work begins, and our repairs are usually done in one visit.
Schedule Your Garage Door Repair Service in Hollywood Today
A garage door that doesn’t work is a security risk and a daily frustration. Call (754) 465-7645 and speak to a live person who can dispatch a technician to your Hollywood home today. You’ll get a photo of the failed part, a written price before any work starts, and a documented record of what we did. Written price first, evidence in hand, no surprises.
Marcus Deller and the Servo team have made more than 18,000 garage doors right since 2015, every one with the same rule: you see the failed part, you approve the written price, and only then do we work. Call now or visit our home page to learn more about how we work.
Written by Marcus Deller, Owner at Servo Garage Doors Hollywood, serving Hollywood since 2015.